Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Front Panel Operation MN/CDM710.IOM
5–49
5.3.5 SELECT: Save/Load
Save/Load Configuration:
Save Load (E)
The Save/Load: menu branch permits the user to store or load up to 10 different modem
configurations in an allotted location of the modem’s non-volatile memory.
If the unit is in Local mode, select a submenu from the Save/Load: menu branch – Save or Load
– using the W X arrow keys, then press ENTER.
However, if the unit is in Remote mode, and the user attempts to select a Save/Load option, the
following message is displayed:
THIS UNIT IS CURRENTLY
IN REMOTE MODE!!
5.3.5.1 (Save/Load:) Save
Save Config to Loc: 9
Empty ( E)
Using Loc: 9 as the example: If Save is selected and no configuration has been saved, the second
line reads ‘Empty’, as shown in the preceding example.
However, if the selected Loc: 9 already contains data, what displays is similar to the next example:
Save Config to Loc: 9
01:02:43 05/08/05 ( E)
The user is shown the time and date stamp of the previously stored configuration, for identification
purposes.
Select the location where the current configuration is to be stored using the
ST arrow keys, then
press
ENTER. There are 10 available locations, numbered 0 through 9.
If the selected location does not contain a previously stored configuration, the following screen is
displayed:
New Config has been
Saved to Loc 9 (E)
However, if the selected location does contain a previously stored configuration, the following
screen is displayed:
Loc 0 Contains Data !
Overwrite? NO YES (E)
Select NO or YES using the W X arrow keys, then press ENTER. By selecting YES, this serves
to overwrite the existing configuration at the selected location.