Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Front Panel Operation MN/CDM710.IOM
5–48
5.3.4.4 (INFO:) Intfc1 (CDI-40 ASI or CDI-60 HSSI Interfaces Only)
The appearance of the Intfc 1 info screen depends on whether a CDI-40 ASI Interface is installed,
or a CDI-60 HSSI Interface is installed:
Intfc 1: ASI J4 Wide
Tx-188 Rx-188
Intfc 1: HSSI Tx Rx
188 Rx-Sat
For the CDI-40 ASI Interface, the information provided may be broken down as follows:
Value Description
Intfc 1: ASI
Indicates that the CDI-40 ASI (Asynchronous Serial Interface) per DVB is installed
in Slot 1.
J4
Indicates the assigned Tx Data Input Connector as J4 or J5.
Wide
Indicates the assigned Bandwidth Selection ASI (Tx Data) as Wide or Narrow.
Tx-188
Identifies the selected Transport Stream Frame Type as 188 (188 byte frame) or
204 (204 byte frame).
Rx-188
Identifies the selected Transport Stream Frame Type as 188 (188 byte frame) or
204 (204 byte frame).
For the CDI-60 HSSI Interface, the information provided may be broken down as follows:
Value Description
Intfc 1: HSSI
Indicates that the CDI-60 HSSI (High-Speed Serial Interface) is installed in Slot 1.
Tx
Displays when the Tx side of the interface has been Enabled.
Rx
Displays when the Rx side of the interface has been Enabled.
188
Identifies the selected sync mode/frame type as 188 (188 byte frame) or 204 (204
byte frame).
Rx-Sat
Identifies the selected source that clocks the output of the Rx Buffer, for the
purpose of delivering data to the Rx port at the user interface: Rx-Sat, Tx-Terr, or
Internal.