Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Front Panel Operation MN/CDM710.IOM
5–43
5.3.2.3 (Monitor:) Event-Log
Stored Events: View
Clear-All (E)
Refer to Table 5-4 for the listing of available alarms. Select View or Clear-All using the ◄ ►
arrow keys, then press
ENTER.
(Monitor:) Event-Log Æ View
Log015 23/05/06 09:27:15
Fault – No PHY Link ()
• This window displays up to 253 Alarms.
• Refer to Table 5-4 for the listing of available alarms.
• Use the
ST arrow keys to display individual alarms.
• The Event-Log stores the live alarms, along with a timestamp for review and
troubleshooting. The date is in international format: dd/mm/yy
(Monitor: Event-Log) Clear-All
Clear All Stored Events:
No Yes (E)
Use the ◄ ► arrow keys to select No to retain, or Yes to clear the buffer of all stored events,
then press
ENTER.
5.3.3 SELECT: Test
Test:
Mode TestPatterns (E)
Test options for the Tx carrier and patterns are selected in this menu. Select a submenu from the
Test: menu branch – Mode or TestPatterns – using the ◄ ► arrow keys, then press
ENTER.
5.3.3.1 (Test:) Mode
Test: Normal RF IF I/O
Tx-CW Tx-1,0 ( E)
The CDM-710 supports many useful test modes. Not all modes are available in all configurations –
they depend upon the modem configuration (Duplex, Rx-Only, Tx-Only) and the data interface(s).
Select Norm, IF (Loop), I/O (Loop), RF (Loop), Tx-CW or Tx-1,0 using the ◄ ► arrow keys,
then press
ENTER.