Product specifications

CRS-170A L-Band 1:1 Redundancy Switch Revision 3
Cables and Connections MN/CRS170A.IOM
4.6 Cabling to the CDM-600L (CLM-9600L)
The block diagram shown in Figure 4-30 depicts connection of a pair of CDM-600L (CLM-9600L)
modems together with the CRS-150 and CRS-170A switches.
Figure 4-30. CDM-600L (CLM-9600L) Block Diagram: Cable Connections
The following table lists cable assemblies that may be supplied with the CRS-170A when used
with the CDM-600L (CLM-9600L) and CRS-150. Other cables between the CRS-150 and the
CDM-600L (CLM-9600L) modems are supplied with the CRS-150.
QTY Part No. Description
2 CA/WR10456-4 Cable – 1:1 Y-Splitter, Data/Control, DB-25M Æ DB-25M, 4’ / DB-9M, 1’
4 CA/6357-2 Cable – RoHS-Compliant, IF Type ‘N’, 50Ω, 2’
IMPORTANT
When connecting the Control cable between the CRS-170A and the
modems, ensure that screw locks on the ‘D’ type connectors are
securely fastened. This will prevent the accidental un-mating of the
cable, particularly when a standby unit is being removed or replaced.
4–28