Product specifications

CRS-170A L-Band 1:1 Redundancy Switch Revision 3
Modem and Switch Configuration MN/CRS170A.IOM
Figure 3-2. CLI 1:1 Redundancy Configuration screen
All configuration changes can only be made to the Online CDM-570L and will
require the user to “
Save Parameters to permanent storage” to
ensure the configuration change is also applied to the Backup CDM-570L.
3.3.2 Non-IP Redundancy Configuration
If the terrestrial data type non Ethernet, (i.e. RS422, G.703) the modem configuration procedure
for non-IP redundancy is as follows:
1. On both modems, Enable 1:1 Redundancy:
Redundancy Configuration Æ 1:1 Redundancy set to ENABLE.
2. Connect all cables – including the control cable, IF cable and data ‘Y’cables – to the modems
and the CRS-170A as directed in Chapter 4. CABLES AND CONNECTIONS.
3–5