Product specifications

CDD-880 Multi Receiver Router Revision 0
Appendix B MN-CDD880
B–6
B.5.1 Unit Parameters
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction
& Qualifier)
Response to Query
Default
Passwords
DPW= N/A Command Only
Resets the admin username/password to:
Username = “comtech”
Password = “comtech”
DPW=
DPW?
DPW*
DPW#
N/A N/A
GE Address IG1= 18 bytes
numerical
Command or Query.
Sets the IP Address and network prefix for the 10/100/1000 BaseT
GE1 Ethernet port, in the form aaa.bbb.ccc.ddd/yy, where:
(Permitted ranges – cannot all be zero)
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255
yy = network prefix (range: 8 to 31)
Other restrictions:
If aaa>191, prefix may not be less than 24.
If aaa>127, prefix may not be less than 16.
Example: IG1=010.006.030.001/24
IG1=
IG1?
IG1*
IG1#
IG1? IG1=xxx.xxx.xxx.xxx/yy
(see Description of
Arguments)
Management
IP Address
IPA= 18 bytes
numerical
Command or Query.
Sets the IP Address and network prefix for the 10/100 Base T
Ethernet management port, in the form aaa.bbb.ccc.ddd/yy, where:
(Permitted ranges – cannot all be zero)
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255
yy = network prefix (range: 8 to 31)
Example: IPA=010.006.030.001/24
IPA=
IPA?
IPA*
IPA#
IPA? IPA=xxx.xxx.xxx.xxx/yy
(see Description of
Arguments)
GE1 Link
Configuration
LC1= 1 byte, value 0
thru 5
Command or Query.
GE1 Interface mode, where:
0=Auto Negotiate
1=1000Mbps -Full Duplex
2=100Mbps – Full Duplex
3=100Mbps – Half Duplex
4=10Mbps – Full Duplex
5=10Mbps – Half Duplex
LC1=
LC1?
LC1*
LC1#
LC1? LC1=x
(see Description of
Arguments)