Product specifications

CDD-880 Multi Receiver Router Revision 0
Ethernet Management MN-CDD880
5–13
Negotiated Link Mode – The read-only actual negotiated line speed and duplex setting for the
FE interface is displayed here. The viewable settings are:
• 1000 BaseT / Full Duplex
•
100 BaseT / Half Duplex
•
10 BaseT / Half Duplex
• 100 BaseT / Full Duplex
(GigE only)
•
10 BaseT / Full Duplex
Once the desired configuration settings have been made on this page, click [Submit] as needed to
save these changes.
5.4.4.4.1.2 Configuration | Interface | GE
Figure 5-9. Configuration | Interface | GE page
The ‘Configuration | Interface | GE’ and ‘GE-2’ page (Figure 5-9) perm
its the user to
configure the GE (10/100/1000 BaseT Gigabit Ethernet) port.
GE Interface
The configuration options available for both pages are identical to those provided on the
‘Configuration | Interface | FE Mgt’ page. Refer back to Section 5.5.4.4.1.1 for information
about using the features of this page.
Note: As a router, the FE and GigE must be on difference subnets.