Product specifications

CDD-880 Multi Receiver Router Revision 0
Ethernet Management MN-CDD880
5–10
5.4.4.3.4 Admin | Firmware
Figure 5-6. Admin | Firmware page
The ‘Admin | Firmware’ page (Figure 5-6) is used to select the c
urrent active firmware image
to be loaded for operation upon power-up or soft reboot.
Slot Information
This read-only status section provides information about the firmware loaded into boot Slot 1 or
Slot 2.
Firmware Configuration
Using the Boot From: drop-down menu, select Latest, Slot 1, or Slot 2, then click [Submit]
when done. The default selection is Latest where, the unit will automatically select the image that
contains the most current firmware.
In this example, Slot 1 is selected to become the active loaded Bootrom – the user must reboot the
unit in order for this change to take effect. Note that the Firmware Information section, which
displays Slot 2 as the designated current active firmware image, will not update until after the unit
is rebooted.