Product specifications

5–1
Chapter 5. ETHERNET
MANAGEMENT
5.1 Introduction
The CDD-880 Multi Receiver Router is equipped with an RJ-45 10/100 BaseT Ethernet management
interface, labeled MANAGEMENT FE, that is used for monitor and control purposes.
This chapter provides a high-level overview of the functionality provided by this interface. For details
about using the CDD-880’s serial remote interface, see Appendix B. REMOTE CONTROL.
5.2 Ethernet Management Interface Protocols
The CDD-880’s 10/100 BaseT Fast Ethernet (FE) Management Interface supports two management
protocols:
• SNMP with public and private MIB
• Web Server (HTTP) Interface for complete product management
5.2.1 Ethernet Management Interface Access
Access to the CDD-880 Ethernet
Management Interface requires the user to
specify the unit’s Management IP
Address. This address may be obtained
via use of a terminal emulator connected
to the 9-pin serial CONSOLE port. As
per the example shown to the right, a
number of operational parameters
(including the unit’s default factory-
assigned IP addresses) are displayed upon
power-up of the unit.
The unit’s default factory-assigned IP addresses are as follows:
Management IP Address 192.1.1.11
Traffic (GigE) IP Address 10.10.1.11