Product specifications
CDD-880 Multi Receiver Router Revision 0
Installation MN-CDD880
2–3
The kit is installed as illustrated in Figure 2-1 and per the following procedure:
Step Description
1
Secure the Adapter Plates to each side of the chassis at the rear, using the #10
flat head screws as shown.
2
Secure the #10 shoulder screws through the Adapter plate mounting slots using
the #10 flat washers, #10 split washers, and #10 hex nuts as shown.
3
Install the rear support brackets onto the equipment rack threaded rear mounting
rails, using the #10 rack bracket bolts.
4
Mount the unit into the equipment rack, ensuring that the #10 shoulder screws
properly engage into the slots of the rear support bracket.
Figure 2-1. Installation of Optional Rear-Mounting Support Bracket Kit