Product specifications

CDD-880 Multi Receiver Router Revision 0
Introduction MN-CDD880
1–7
When service requirements change, the operator can upgrade the topology of the CDD-880 to meet
those requirements within minutes. This accelerated upgrade can be accomplished because of FAST’s
extensive use of the programmable logic devices incorporated into Comtech EF Data products.
FAST Implementation
Comtech EF Data’s FAST system is factory-implemented in the CDD-880. All FAST options are
available through the basic platform unit at the time of order – FAST allows immediate activation of
available options, after confirmation by Comtech EF Data, via the remote control interface.
See Appendix A. FAST ACTIVATION PROCEDURE for further information.
FAST Accessible Options
Hardware options for basic demodulators can be ordered and installed either at the factory or in
the field. The operator can select options that can be activated easily in the field, depending on
the current hardware configuration of the CDD-880. A unique access code enables configuration
of the available hardware.
The following table shows the available FAST and FAST-accessible hardware options:
Option Description and Comments Option Installation Method
Demod Card w/VersaFEC Up to six (6) dual demodulator cards installable. Hardware / FAST
Rx Data and Symbol Rate
CCM 1 to 5 Mbps
FAST
CCM 1 to 10 Mbps
CCM 1 to 25 Mbps
CCM 1 to 50 Mbps
CCM 1 to 75 Mbps
CCM 1 to 100 Mbps