Product specifications

CDD-880 Multi Receiver Router Revision 0
Introduction MN-CDD880
1–5
LED Indicators
1.3.4 Physical Features
1.3.4.1 Front Panel
Figure 1-4. CDD-880 Front Panel View
Figure 1-4 shows the front panel of the CDD-880. The front panel features 16 Light-Em
itting-
Diode (LED) indicators. The LEDs indicate, in a summary fashion, the status of the unit:
• Overall Unit Status
• Stored Event
• (FUTURE) Online when in 1:1 Redundant Mode (Online or Offline)
• 10/100/1000 BaseT Gigabit Ethernet (GigE) Activity
• Traffic Status for each of up to 12 Rx Traffic (receive) channels.
Note the following:
LED Condition
UNIT STATUS
Green No Unit Faults or Alarms.
Amber No Unit Faults, but an Alarm exists.
Red A Unit Fault exists (Example: PSU fault).
STORED
EVENT
Amber
There is a Stored Event in the log, which can be viewed from the Web Server
Interface or retrieved via the remote control interface.
Off There are no Stored Events.
ONLINE
Green The Unit is On Line, and carrying traffic.
Off
The Unit is Off Line (standby) – forced by externally connected 1:1 or 1:N
redundancy system.
GE
LINK/ACTIVITY
Green (solid) Traffic Ethernet is connected, but no traffic exists.
Green (blinking) Ethernet activity detected.
Off GE Ethernet port is not connected.
Rx TRAFFIC 1
through 12
Green (solid) No Rx Traffic Faults (demod and decoder are locked, everything is OK).
Green (blinking)
No Rx Traffic Faults, blinks when a packet is being received from the satellite link to
this unit.
Amber Rx Traffic has an Alarm.
Red Rx Traffic has a Fault.
Off Demod Card is not installed.