Product specifications

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–28
5.4.4.3.6 Configuration | ECM (Entry Channel Mode)
 1. TheConfiguration|ECMpageisoperationalonlywhentheoptional
VIPERSATMANAGEMENTSYSTEM(VMS)isinstalledandenabled.

2. ECMusesDemod1astheALOHAchannel.
Appendix G. ENTRY CHANNEL MODE SWITCHING in the VMS v3.x.x VIPERSAT
ManagementSystemUserGuide(CEFDP/NMN/22156)

Use this page to configure ECM (Entry Channel Mode). ECM provides a method for remotes
requiring dSC
PC access channels to either enter the network initially or re‐enter the network
afterapowerorserviceoutage.

Figure5‐15.Configuration|ECMpage
ECM Hub Configuration
Theacceptable/validoperatingrangesforitemsinthissectionareprovidedinparentheses.

• Enable–ThisfeatureactivatesDemod‐1(RxTRAFFIC1)onthisunittofunctio nastheECM
Controller for a group of CDM‐840 Remote Routers. Use the drop‐down menu to select
operationasEnableorDis
able,andthenclick[Submit]tosave.
