Product specifications

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–25
5.4.4.3.4 Configuration | ARP
UsethispagetoconfiguretheCDD‐880ARP(AddressResolutionProtocol)parameters.



Figure5‐13.Configuration|ARPpage
Add Static ARP
Enter the desired IP and MAC addresses. Click [Add Entry] when done. The Index column
automatically increments to the next available number when the specified static ARP entry is
addedtotheARPTable.
Delete Static ARP
EntertheEntryIndextoDelete.Click [DeleteEntry]todeletethespecifiedentryindexfromthe
ARPTable.
Flush Dynamic ARPs
Click[FlushDynamicARP]todeletealldynamically‐learnedARPentries.
ARP Table (Edit)
This section displays all current Static and Dynamic  ARP entries, and allows to user to directly
editthecurrentStaticARPentries.Notethefollowing:
