Product specifications

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–24
CDM‐840 Remote Router Installation and Operation Manual (CEFD P/N
MN‐CDM840)

• Current Es/No (read‐only) –This is the current Es/No of the demod, in 0.1 dB increments.
Thedisplayedrangeisfrom‐5dBto35dB.

• CurrentRxMODCOD (read‐only)–Thisis thecurrentMODCODofthedem
od.Itisusedto
measuretheCurrentEs/No.
Rx ACM Events (read-only)
In addition to the date‐ and time‐stamp assigned for each event, information is presented as
follows(fromlefttoright):

Column Description
Demod # This is the available "FILLED" demodulator slot (automatically assigned
in pairs per each installed dual demodulator card).
New ES/No This is the Es/No reported by the receiving demod when the MODCOD
switch occurred.
New Rx ModCod This is the MODCOD that the demod was switched to by the ACM
algorithm.
New Rx Data Rate This is the Rx Data Rate at the time of this event.

Click[ClearACMEvents]toclearallACMstatisticsfromthebuffer.

