Product specifications

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–23
5.4.4.3.3 Configuration | ACM
UsethispagetoconfigureCDD‐880ACM(AdaptiveCodingModulation)operations.


Figure5‐12.Configuration|ACMpage
ACM Demodulator Settings
Foreachoperatingdemodulator,notethefollowingselectionsonaper‐columnbasisfromleft
toright:

• Demod # – This is the available "FILLED" demodulator slot (automatically assigned in pairs
pereachinstalleddualdemodulatorcard).

• ACMEnable–ClicktooptionbuttontoenableordisableACMoperation.

• Remote CDM‐840 IP Address – En
ter the CDM‐840 Remote Router IP Address in the form
XXX.XXX.XXX.XXX.Click[Submit]tosave.
