Product specifications

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–22
• Rx Spectrum Invert – Use the drop‐down menu to select Spectrum Inversion operation as
eitherNormalorInverted.

• RxDescram–Usethedro p‐downmenutoselectRxDescramblingaseitherOfforNormal.

• Eb/No Al arm Pt (0.1‐16.0) – Enter the Eb/No Alarm Point value, in dB. This value, as
calcula
ted by the demodulator, is the energy per bit (Eb) divided by the noise spectral
density(No).


When ACM is enabled, the CDD‐880 will issue an alarm only if the
demodulatorisatthelowestavailableMODCOD(BPSK).

• Circuit ID (4‐24) – Enter an identification label for the demod, from four to 24 characters.
Click[Submit]tosave.

• AcquisitionRange(1‐200)–Ent
ertheAcquisitionRangevalue,inkHz.Notethattherangeis
dependentonthecurrentsymbolrateofthedemodulator.Click[Submit]tosave.


