Product specifications

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–19
o Auto* o 100BaseT/HalfDuplex o 10BaseT/HalfDuplex
o 1000BaseT/FullDuplex o 100BaseT/FullDuplex o 10BaseT/FullDuplex


*Autoistherecommendedconfigurationselection.

• NegotiatedLinkMode(read‐only)–Theactualnegotiatedlinespeedandduplexsetting for
the ‘ETHERNET | TRAFFIC / MANAGEMENT | GE’ port is displayed here. The viewable
settingsare:

o 1000BaseT/FullDuplex o 100BaseT/Fu
llDuplex o 10BaseT/FullDuplex
o 100BaseT/HalfDuplex o 10BaseT/HalfDuplex

Setthedesiredconfigurations.Click[Submit]tosave.
5.4.4.3.1.2 Configuration | Interface | GE
The ‘Configuration | Interface | GE’ page permits the user to configure the rear panel
‘ETHERNET|TRAFFIC|GE’10/100/1000BaseTGigabitEthernetport.

Figure5‐10.Configuration|Interface|GEpage
GE Interface
The information and configuration options provided on these pages  are identical to those
featuredonthe‘Configuration|Interface|FEMgt’page.SeeSect.5.4.4.3.1.1forinformation
aboutusingthesefeatures.
