Product specifications

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–18
5.4.4.3 Configuration Pages
Usethenested‘Configuration’pagestoconfigureallunitparameters.ClicktheInterface,Mod,
ARP,Routing,Compression,orWANtabtocontinue.
5.4.4.3.1 Configuration | Interface
ClicktheFEMgtorGEtabtocontinue.
5.4.4.3.1.1 Configuration | Interface | FE Mgt
Usethispagetoconfiguretherearpanel‘ETHERNET|TRAFFIC/MANAGEMENT|GE’10/100/
1000BaseTGigabitEthernetM&Cport.



Figure5‐9.Configuration|Interface|FEMgtpage

FE – Management Interface
• MACAddress–TheMACAddress is read‐onlyandcannotbechanged.

• IPAddress/CIDRMask–UsethisboxtoentertheIPAddressandCIDR(ClasslessInter‐
DomainRouting)SubnetMask.ThevalidrangefortheSubnetMaskisfrom8to30.


1. TheIPAddressfortheFEandGEinterfacesmustbedifferentandon
separatesubnets.
2. TheFEandGEPortsarenotcurrentlyisolated;theCDD‐880canpass
trafficfromonesubnettotheother.
• LinkConfiguration–Usethedrop‐downmenutoselectthelines
peedandduplexsetting
forthe‘ETHERNET|TRAFFIC/MANAGEMENT|GE’port.Theavailableselectionsare:
