Product specifications

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–16
5.4.4.2.6 Admin | VMS

The Admin | VMS page is operational only when the optional VIPERSAT
MANAGEMENTSYSTEM(VMS)isinstalledandoperational.
VMSv3.x.xVIPERSATManagementSystemUserGuide(CEFDP/NMN/22156)




 










Figure5‐8.Admin|VMSpage
Vipersat Management System Configuration
Theacceptable/validoperatingrangesforitemsinthissectionareprovidedinparentheses.

• NetworkID(1‐254)–TheNetworkIDisusedbytheVMStoidentifyVipersatunitswithina
network and allows the VMS to manage multiple networks, each with its own unique
NetworkIDnumber.Alldevic
esinacommonnetworkwillhavethesame NetworkID.This
designationdefinestowhichnetworktheCDD‐880belongs.

• Management Base Port– The Management Base Port sets the starting IP port addressing
forallVMSmessages.


Use this setting ONLY if network port addressing is in contention. Changes to
thisaddressbaseaffecttheentirenetwork,requiringconfigurationchangesto
all modems  (i.e., the “hub” CDM‐800 Gateway Router and the “spoke”
CDM‐840RemoteRouter).Leavethissettingatthedefaultvalueof49152(hex
C000)toavoidunnecessaryconfigurationchanges.

• Management Multicast IP  Port – Enter the Multicast IP Address assigned to all Vipersat
network units to receive management messages fr
om the VMS. This address must match
theVMSTransmitMulticastAddress.