Product specifications

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–14
5.4.4.2.4 Admin | Firmware

Chapter4.UPDATINGFIRMWARE
Use this page to select which image  (boot Slot #) is to be designated as the active running
firmwareimage–i.e.,theversionloadedforoperationuponpower‐uporsoftreboot.

Figure5‐6.Admin|Firmwarepage
Slot Information
Thisread‐onlystatussectiondisplaysoperatingstatusforthefirmwareversionsloadedintoSlot 
#1andSlot#2.
Firmware Configuration
UsetheBootFrom:drop‐downmenutoselectLatest,Slot1,orSlot2.Thedefaultselectionis
Latest, in which the unit will automatically select the image that contains the most current
firmware.

Click[Submit]tosave.NotethattheSlotInformationsection, whichinFigure5‐6displays Slot
#1 as the designated ac
tive running firmware image, will  not update until after the unit is
rebooted.
System Reboot
Click[Reboot]toreboottheCDD ‐880.Oncetheunitreboots,theusermustloginonceagainto
resumeuseoftheWebServerInterface.Seethe‘Utility|Reboot’page(Sect.0)forfullde
tails
abouttherebootprocess.