Product specifications

CDD-880 Multi Receiver Router Revision 1
Ethernet-based Remote Product Management MN-CDD880
5–2
5.2 Ethernet Management Interface Protocols
The user PC facilitates access to Ethernet‐based remote monitor and control (M&C) of the
CDD‐880throughtwoseparately‐operatedprotocols:

• Simple Network Management Protocol (SNMP). This requires a user ‐supplied Networ k
Management System (NMS) and a user‐supplied Management Information Base (MIB) File
Browser.

• The CDD‐88
0 Web Server (HTTP) Interface. This requires a compatible user‐supplied Web
browsersuchasInternetExplorer.
5.2.1 Ethernet Management Interface Access
Access to the CDD‐880 Ethernet Management Interface requir es the user to specify the unit
ManagementIPAddress.Viauseofaterminalemulatorconnectedtotherearpanel9‐pinserial
‘CONSOLE’port,thisaddressmaybeobtainedfromtheCDD‐880SerialInterfaceuponpower‐
upoftheunit.Asshown,anumb
erofoperationalparameters(includingtheunitfactory‐default
IPaddresses)aredisplayed.

The factory‐assigned default IP addresses are provided in the table that follows (if otherwise
assigned,theusermayusethelastcolumntowritedowntheIPAddressesforfuturereference):

Description Default Address User-assigned Address
TRAFFIC / MANAGEMENT GE IP Address 192.168.1.11 _____________________
‘TRAFFIC / GE’ (GigE Traffic ) IP Address 10.10.1.11 _____________________

SeeChapter6.SERIAL‐BASEDREMOTEPRODUCTMANAGEMENTfordetailson
settingupandusingtheCDD‐880SerialInterface.