Product specifications

5–1
Chapter 5. ETHERNET-BASED
REMOTE PRODUCT
MANAGEMENT
5.1 Introduction
Ethernet‐based Remote Product Management of the CDD‐880 is available using therear panel
‘ETHERNET|TRAFFIC/MANAGEMENT|GE’RJ‐4510/100/1000BaseTGigabitEthernettraffic
andM&Cport.

 1. TOPROCEEDWITHETHERNET‐BASEDREMOTEPRODUCTMANAGEMENT(SNMP
ORWEBSERVER),ASSUMPTIONSAREMADETHAT:

• TheCDD‐880isoperat
ingwiththelatestversionfirmwarefiles.

• TheCDD‐880isconnectedtoauser‐supplied,Windows‐basedPCasfollows:

o The PC serial port is connected to the CDD‐880 rear panel ‘CONSOLE’
portwithauser‐suppliedserialcable.

o ThePCEt
hernetportisconnectedtotheCDD‐880rearpanel‘ETHERNET
|TRAFFIC/MANAGEMENT|GE’10/100/1000 BaseTGigabitEthernet
port with a user‐supplied hub, switch, or direct Ethernet cable
connection.

o Theuser PCisrunning atermin al emulationprogram(foroperationof
the CDD‐880 Serial Command Line Interface) an
d a compatible Web
browser(foroperationoftheCDD‐880WebServerInterface).

• The CDD‐880  Management IP Address has been  noted using the CDD‐880
SerialCommandLineInterface(CLI).

2. USE OF THE ETHERNET‐BASED SNMP INTERFACE IS RECOMMENDED ONL
Y FOR
ADVANCEDUSERS.ALLOTHERUSERSARESTRONGLYENCOURAGEDTOUSETHE
CDD‐880WEBSERVERINTERFACEFORMONITORANDCONTROL(M&C)OFTHE
CDD‐880.