Product specifications

CDD-880 Multi Receiver Router Revision 1
Updating Firmware MN-CDD880
4–2
(Left) Standard CDD-880 115V/230V AC Unit
(Right) Optional CDM-880 48V DC Unit
4.2 Getting Started: Preparing for the Firmware Download
1. First,identifytheCDD‐880assignedManagementIPAddress,andthefirmwarenumber/
revisionletter/revisionnumber.

User‐supplieditemsneeded:

• AMicrosoftWindows‐basedPC,equippedwithavailableserialandEthernetports;a
compatibleWebbrowser(e.g.,InternetExplorer);andaterminalemulatorprogram
(e.g.,TeraTermorHyperTerminal).

• A9‐pinserialcabletocon
nectthePCtotheCDD‐880.

A. Usethe9‐pinserialcabletoconnectthe
CDD‐880‘CONSOLE’porttoaserialporton
theuserPC.




B. OnthePC:Opentheterminalemulatorprogram.

Refer to your te
rminal emulator program HELP feature or user guide for
operatingandconfigurationinstructions.
Configuretheutilityprogramserialportcommunicationandterminaldisplayoperation:

• 38400bps(BaudRate) • 8 DataBits • 1 StopBit
• Parity=NO • PortFlowControl=NONE • DisplayNewlineRx/Tx:CR
• LocalEcho=ON


C. OntheCDD‐880:Turnonthepower.







D. OnthePC:MakenoteoftheinformationdisplayedontheCDD‐880CommandLine
Interface(CLI):

• ManagementIPAddress(defaultis192.168.1.11/24)
• FirmwareNumberandRevisionLetter(e.g.,FW‐0000423F)
• FirmwareReleaseVersion(e.g.,1.3.2)