Product specifications

CDD-880 Multi Receiver Router Revision 1

Rear Panel Connections MN-CDD880

3–4

Connection Instructions: Orient the plug to the receptacle in the proper position. Press firmly 

into place. Use the jack screws to secure the plug to the receptacle jack nuts. Do not over‐

tighten.

3.1.3 Circular Cable Connections

Circular connectors are intended for weatherproof outdoor applications. The connector pairs

featureasleevelockconfiguration,withanarrayofpins(maleside)coupledtomatingsockets

(femaleside).



3 SleeveLockfeatures 

2 SecondaryAlignmentfeatures

1 PrimaryAlignmentfeatures



ConnectionInstructions:Engageallofthealignmentandlockfeatures

between the male connector (on the interconnection cable) and

female socket (e.g., the ODM/R‐840 CONSOLE/REDUNDANCY port or

thePOWERport).



Toinstallthemaleconnectorintothefemaleconnector:



1. Engage the primary and secondary alignment tabs on the ma

le

connectorwiththematingcutoutson thefemalesocket.



2. Pushthemaleconnectorintothefemalesocket.



3. Turn the male connector sleeve clockwise until the sleeve lock

cutouts engage f ully  with the female socket tabs and you hear a

“click”sound

3.1.4 RJ-45, RJ-48 Cable Connections

TheplugforanRJ‐45orRJ‐48cablefeaturesaflexibletab.TheRJ‐45orRJ‐48

jack features a mating slot. This design configuration assures proper

installationandpinorientation.



Connection Instructions: Press down the tab on the cable plug, and then

inserttheplugintotheRJ‐4xjack.Th

econnectioniscompletewhenthetab

‘clicks’intopositioninsidethejack.