Product specifications

CDD-880 Multi Receiver Router Revision 1
Introduction MN-CDD880
1–6
1.3.3.2 Rear Panel
 PROPERGROUNDING PROTECTIONISREQUIRED.Theequipmentmustbeconnected
totheprotectiveearthconnectionatalltimes.Itisthereforeimperativethattheunit
isproperlygrounded, usingthegroundstudprovidedonthe unit rear panel, during
installation,con figur at ion,andoperation.

• Sect.3.2CDD‐880CablingConnections
• Sect
.3.3CDD‐880GroundingandPowerConnections

Externalcablesareattachedtoconnectorsprovidedontherearpaneloftheunit(Figure1‐5).





(Top) Standard AC Unit
(Bottom) Optional 48V DC Unit
Figure 1-5. CDD-880 – Rear Panel View
1.3.3.2.1 Rear Panel Standard Features
Theunitprovidesthefollowingstandardinterfaces:

DataInterfaces:

• (1X)10/100/1000BaseTGigabitEthernetRJ‐45Interface(‘ETHERN ETTRAFFIC|GE’port)
forEthernettraffic.

• (1X) 10/100/1000 BaseT Gigabit Et hernet RJ‐45 Interface (‘ETHERNET TRAFFIC /
MANAGEMENT |GE’ port) for Ethe rnet Traffic or Ethernet‐based management and
controlpu
rposes(HTTP/WebandSNMP).

• (1X)DB‐9FEIA‐232connectorforserialremotecontrol(‘CONSOLE’port).

Tx(Transmit)IFInterfaces

• (1X)Type‘N’femaleconnectorfor50ΩL‐Band(950 to2150MHz)

PowerInterface

• 115/230VACPrimaryInputPowerSupplywithPress‐fitFuseHolder