Product specifications

CDD-880 Multi Receiver Router Revision 1
Serial-based Remote Product Management MN-CDD880
6–5
6.2.2.2 Target Address
InEIA‐232applications,thisvalueissetto0000.

The Target Address designates the packet destination. The Controller does not have its own address. After the
Controller sends a packet with the designated Target Address, the Target responds to the Controller, using this
same address, to indicate the source of the packet.
6.2.2.3 Address Delimiter
Thisisthe“forwardslash”character'/'(ASCIIcode47).
6.2.2.4 Instruction Code
Thisisathree‐characteralphabeticsequencethatidentifiesthemessagesubject.

Whereverpossible,theinstructioncod eshavebeenchosentohavesomesignificance–e.g.,MLCforManagementLinkConfiguration,
IPAforManagementIPAddress,etc.Thisaidsinthereadabilityofthemessage,shoulditbedisplayedinit
srawASCIIform.

Onlyuppercasealphabeticcharactersmaybeused(‘A’to‘Z’,ASCIIcodes65‐90).
