Specifications

3 of 32
Configuration Overview
FUNCTION DESCRIPTION
Spectrum Analyzer,
9 kHz to 4/6 GHz
Locates and identifies various signals over a wide frequency range.
Detects signals as low as -152 dBm with phase noise better than -100 dBc/Hz.
Interference Analyzer
(Option 25)
Includes everything you need to monitor, identify, and locate interference using the
spectrogram display, RSSI, Signal ID, signal strength meter, and interference mapping.
Coverage Mapping (Option 431) Provides indoor and outdoor mapping capabilities of RSSI, and ACPR measurement levels.
GPS Receiver (Option 31) Provides location and UTC time information. Also improves the accuracy of the reference oscillator.
Tracking Generator (Option 20) Features high dynamic range with power steps ranging from -50 dBm to 0 dBm in 0.1 dB steps.
Bias Tee (Option 10) Possesses a built-in 32 V bias tee that can be turned on as needed and applied to the RF In port.
High Accuracy Power Meter
(Option 19)
Connects high accuracy 4, 6, 8, 18, and 26 GHz USB power sensors with better than
± 0.16 dB accuracy.
Power Meter (Option 29) Makes channelized transmitter power measurements.
Channel Scanner (Option 27) Measures the power of multiple transmitted signals. Scans up to 1200 channels using Script Master.
Gated Sweep (Option 90) Views pulsed or burst signals such as WiMAX, GSM, and TD-SCDMA only when they are on.
AM/FM/PM Analyzer
(Option 509)
Analyzes AM/FM/PM signals and measures FM/PM deviation, AM depth, SINAD,
Total Harmonic Distortion and much more.
PIM Analyzer
(Option 419)
The PIM Analyzer measures the 3
rd
, 5
th
, or 7
th
order intermodulation products in the receive
band of two high power tones generated by the 40 Watt PIM Master.
10 MHz Bandwidth Demod
(Option 9)
The 10 MHz BW demod option enables users to turn the Spectrum Master in to a Signal Analyzer.
GSM/EDGE Measurements
(Option 40, 41)
RF and Demod Measurements enables end users to increase data rate and capacity by ensuring
good signal quality.
W-CDMA/HSPA+ Measurements
(Option 44, 45, 65, 35)
Uses Spectrum Master’s RF, Demod, and OTA Measurements to verify frequency error, multipath
signals, EVM and much more.
LTE
(Option 541, 542, 546)
Spectrum Master’s LTE Measurements enables users to make RF, Demod, and OTA
Measurements. Verify ACLR, Cell ID, Frequency Error, EVM, and much more.
TD-SCDMA/HSPA+ Measurements
(Option 60, 61, 38)
The TD-SCDMA/HSPA+ analyzer includes RF, Demod, and OTA measurements and the ability to
measure EVM and Peak CDE. It also includes an OTA Tau scanner.
cdmaOne/CDMA2000 1X
(Option 42, 43, 33)
RF, Demodulation, and OTA Measurements. Measures EVM, Noise floor, ACPR and much more.
Fixed and Mobile WiMAX
(Option 46, 47, 66, 67, 37)
RF Demod, and OTA Measurements verify Cell ID, Sector ID, Preamble, EVM, RCE, and much more.
ISDB-T
(Option 30, 32)
Makes RF and Demod Measurements to verify Spectrum Mask and MER.
Ensures digital TV transmitters are configured according to license agreements.
Ethernet Connectivity
(Option 411)
Provides the ability to operate automated testing from remote PC, or conversely, to upload data
from field test to the PC. Remote access control is also provided through Master Software Tools.
Integrated Measurement Capabilities
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com