Datasheet

Page 4 of 28
Spectrum Master™ MS2712E and MS2713E Specifications
PIM Analyzer (Requires PIM Master™)
See Product Brochure 11410-00546
2-Port Transmission Measurement (Option 0021)
Frequency
Frequency Range 2 MHz to 4 GHz (MS2712E), 2 MHz to 6 GHz (MS2713E)
Frequency Resolution 10 Hz
Output Power
High 0 dBm, typical
Low –30 dBm, typical
Dynamic Range
2 MHz to 4 GHz 80 dB
>4 GHz to 6 GHz 70 dB
Application Options Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)
Bias-Tee (Option 0010)
Setup On/Off, Voltage, Current (Low/High)
Voltage Range +12 V to +32 V
Current (Low/High) 250 mA/450 mA, 1 A surge for 100 ms
Resolution 0.1 V
Setup Parameters
Frequency Center/Start/Stop, Span, Freq Step, Signal Standard, Channel #, Channel Increment
Amplitude Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection
Span Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span
BW RBW, Auto RBW, VBW, Auto VBW, RBW/VBW, Span/VBW
Measurement Setup ACPR, RSSI
Point Distance / Time Setup Repeat Type Time Distance
Save Points Map Save KML, JPEG, Tab Delimited
Recall Points Map Recall Map, Recall KML Points only, Recall KML Points with Map, Recall Default Grid
Ethernet Connectivity (Option 0411)
Connector RJ45
LAN Speed 10 Mbps
Mode Static, DHCP
Static IP settings IP address
Subnet Mask
IP Gateway
Remote Control Remote Access utility provided with Master Software Tools
Data Upload With Line Sweep Tools through LAN connection
Coverage Mapping (Options 0431)
Measurements
Indoor Mapping Outdoor Mapping
RSSI
ACPR
RSSI
ACPR