Datasheet

Spectrum Master™ MS2712E and MS2713E Specifications
General Specifications
All specications and characteristics apply under the following conditions, unless otherwise stated: 1) After 5 minutes of warm-up time, where the instrument is
left in the ON state; 2) All specications apply when using internal reference; 3) All specications subject to change without notice; 4) Typical performance is the
measured performance of an average unit; 5) Recommended calibration cycle is 12 months; 6) Performance Sweep Mode.
Setup Parameters
System Status (Temperature, Battery Info, Serial Number, Firmware Version, Options Installed)
Self Test, Application Self Test
GPS (see Option 0031)
System Options
Name, Date and Time, Brightness, Volume
Language (English, French, German, Spanish, Chinese, Japanese, Korean, Italian, User dened)
Reset (Factory Defaults, Master Reset, Update Firmware)
File Save, Recall, Delete, Directory Management
Save/Recall Setups, Measurements, Screen Shots Jpeg (save only)
Delete Selected File, All Measurements, All Mode Files, All Content
Directory Management Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB
Internal Trace/Setup Memory 2,000 traces, 2,000 Setups
External Trace/Setup Memory Limited by size of USB Flash drive
Mode Switching Auto-Stores/Recalls most recently used Setup Parameters in the Mode
Connectors
RF Out Type N, female, 50 Ω
RF Out Damage Level 23 dBm, ± 50 VDC
RF In Type N, female, 50 Ω
RF In Damage Level +35 dBm peak, ± 50 VDC, Maximum Continuous Input (≥ 10 dB attenuation)
GPS SMA(f)
External Power 5.5 mm barrel connector, 12.5 to 15 VDC, < 4.0 Amps
USB Interface (2) Type A, Connect USB Flash Drive and Power Sensor
USB Interface 5-pin mini-B, Connect to PC for data transfer
Ethernet Interface RJ45 connector for Ethernet 10-Base T (Available with opt 411 Ethernet)
Headset Jack 2.5 mm mini-phone plug
External Reference In BNC, female, 50 Ω, Maximum Input +10 dBm
1 MHz, 5 MHz, 10 MHz, 13 MHz
External Trigger/Clock Recovery BNC, female, 50 Ω, Maximum Input ± 50 VDC
Display
Type Resistive Touchscreen
Size 8.4” daylight viewable color LCD
Resolution 800 x 600
Battery
Type Li-Ion
Battery Operation 3.0 hours, typical
Electromagnetic Compatibility
European Union CE Mark, EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
Australia and New Zealand C-tick N274
Interference EN 61326-1
Emissions EN 55011
Immunity EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-11
Safety
Safety Class EN 61010-1 Class 1
Product Safety IEC 60950-1 when used with Company supplied Power Supply
Environmental
Operating Temperature -10 ºC to 55 ºC
Maximum Humidity 95% RH (non-condensing) at 40 °C
Shock MIL-PRF-28800F Class 2
Storage -40 ºC to 71 ºC
Altitude 4600 meters, operating and non-operating
ESD
RF Port Center Pin Withstands up to ± 15 kV
Size and Weight
Size 273 mm x 199 mm x 91 mm (10.7 in x 7.8 in x 3.6 in)
Weight 3.45 kg, (7.6 lbs)
Page 21 of 28