Installation guide

Wireless ADSL Modem User’s Manual 5
CHAPTER 2 BEFORE INSTALLATION
Package Content
Make sure that you have the following items:
• ADSL Wireless Ethernet Modem Router (Single-Port/Four-Ports)
• 12VDC Power Adaptor
• Telephone cable
• Installation guide
• Splitter/ CAT-5 UTP Fast Ethernet cable/ USB cable (Optional)
Note : If any of the items is damaged or missing, contact your dealer immediately.
Hardware Indicators
Front Panel
Place the Wireless ADSL Router in a location that permits an easy view of the LED
indicators shown in the front panel diagram below.
Wireless ADSL Ethernet Modem Router (Single-Port)
LED Indicators
The LED Indicators read as follows:
LED NAME Descriptions
PWR
On: ADSL modem is power on
RDY
Blink: ADSL modem is ready
Off: ADSL modem is not ready or has malfunctioned.
ADSL
Blink: ADSL modem is ready to connect or the link is down
On: the ADSL modem links to DSLAM successfully.
DATA
Blink: when data is sent or received..
LAN-LINK
On: ADSL modem has a successful Ethernet connection.