Installation guide

Wireless ADSL Modem User’s Manual 3
• HTTP Web-based Management
• Firmware upgrade via FTP
• Customizable Web pages
• WAN and LAN side connection statistics
• Configuration of static routes and Routing table
• Configuration of NAT/NAPT
• Password protected access
• Selection of Bridge or Router Mode
• PPP user ID and password
• Configuration of VCs (Virtual Circuits)
• Ethernet Interface
• IEEE 802.3 compliant
• 10/100 Mbps
• Simultaneous operation with USB
• ADSL Ethernet Modem Router (Four-Port Only)
• Each port can work at 10 Mbps or 100Mbps, full-duplex or half-duplex mode
• Automatic MDI/MDIX crossover for 100Base-TX and 10Base-T ports
• Auto-negotiation and speed-auto-sensing support
• Back-pressure-based flow control on half-duplex ports
• Pause-frame-based flow control on full duplex ports
• Store-and-forward switching mode
• High performance lookup engine with support for up to 4096 MAC address
entries with automatic learning and aging
• Password protection access ( 2 levels)
• Selection of bridge or router mode
• PPP user ID and password
• Configuration of VCs ( Virtual circuits )
• System Logging
• Restore to Factory defaults via Web or Hardware
• FTP server and client