Installation guide

Wireless ADSL Modem User’s Manual 2
ATM Forum UNI 3.1/4.0 PVC
Up to 8 VCs (Virtual Circuits)
ATM SAR (Segmentation and Reassembly)
ATM AAL5 (Adoption Layer type 5)
OAM F4/F5
Bridge Mode
Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses Router Mode
Router Mode
IP routing – RIPv2 ( Backward compatible with RIPv1 )
Static routing
DHCP (Dynamic Host Configuration Protocol) Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol
Simultaneous USB and Ethernet operation
IGMP (Internet Group Management Protocol)
Security
User authentication for PPP
PAP (Password Authentication Protocol)\
CHAP (Challenge Authentication Protocol)
Password protected system management
RADIUS client authentication
USB Host Interface
Compliant with USB Specification, Revision 1.1
USB full speed (12 Mbps)
Vendor specific descriptors
Wireless IEEE 802.11g Compliance
54Mbps Access Point for wireless connectivity
Interoperable with IEEE 802.11g(PBCC & OFDM Modulation Technology
Supports) 2.4GHz compliance equipment
128-bit and 64-bit WEP support
WPA support