Installation guide

Wireless ADSL Modem User’s Manual 51
• Firmware Version: This is the version of the Wireless Security firmware.
• WPA Mode: This field allows you to enable/disable WLAN Security.
• Network Authentication: There are two available methods of WLAN Security:
o WPA RADIUS: This option uses 802.1X for authentication with
RADIUS server while using TKIP encryption.
o WPA Pre-Shared Key: This option uses a pre-shared key (psk) for
authentication while using TKIP encryption.
• Data Encryption: support TKIP.
• WPA Pre-Shared Key: This is the pre-shared key for use in WPA PSK security
method.
• WPA Group ReKey Interval (sec): This is the time-out value for the WPA
Group Key.
Note: With WLAN Security enabled, select “Enable Encryption” and choose WEP
Key ID 2 on the Wireless Page (see previous section). This will allow the 802.1x
client and non-802.1x client to work simultaneously in the 802.1x WLAN security
Method.
• RADIUS Server Address: This is the IP address of the RADIUS server.
• RADIUS Server Port: This is the UDP port of the RADIUS server. Default to
1812
• RADIUS Shared Secret: This is the password shared between an 802.11 access
point and the RADIUS server.
User Level Username/Password
This page allows the user or admin to set the password for the user account.
The User Password can be up to 65 characters (excluding ‘&’).
Note: User Account cannot be used to access FTP server.