Installation guide

Wireless ADSL Modem User’s Manual 27
• PPP password: Provided by ISP
• NAT Configuration: NAPT
Please see scenario 4: Router Mode Configuration PPPoA in Appendix for more detail
configuration.
PPPoE ( RFC 2516)
Following settings are necessary when working under this mode:
• VPI/VCI
• Encapsulation: PPPoE LLC
• Bridged: Disabled
• PPP User Name: Provided by ISP
• PPP password: Provided by ISP
• NAT Configuration: NAPT
Please see scenrio 5: Router Mode Configuration PPPoE in Appendix for more detail
configuration.
Classical IP over ATM ( RFC 1577)
Following settings are necessary when working under this mode:
• VPI/VCI
• Static IP Address: provided by ISP
• Subnet Mask: provided by ISP
• Default Gateway: provided by ISP
• Encapsulation: Classical IP over ATM
• Bridged: Disabled
• NAT Configuration: NAPT
• Preferred DNS server: IP is Provided by ISP