Installation guide

Wireless ADSL Modem User’s Manual 11
CHAPTER 4 NETWORKING SETTINGS
TCP/IP Configuration for Windows 95/98/ME
Use the following steps to configure the manager PC to be a DHCP client. These same
steps must be performed for every host PC on your network if you use the DHCP
function of the Router.
1. Click Start button, Settings and choose Control Panel.
2. Double click Network icon and select Configuration tab.
3. Select the TCP/IP line that has been associated to your network card in the
Configuration tab and click Properties.
4. Now, you have two setting methods:
A. Get IP Address from Router automatically ( DHCP )