Installation guide

Wireless ADSL Modem User’s Manual 10
Installation Procedures
• Power on: Connect the Adapter to power inlet and turn the power switch on, this
product will enter a self-test phase. When it is in the self-test phase, the indicators
READY LED will be lighted ON for about 8 seconds, and the READY LED will be
flashed to indicate that the self-test phase has finished. Finally, the READY LED will
be flashed to indicate that router is in normal operation.
• ADSL connection: Simply plug one end of the cable into the ADSL port (RJ-11
receptacle) on the rear panel of the Router and insert the other end into splitter.
• Connect Router to LAN: Prepare an Ethernet cable to connect Router to Hub or
Switch of your LAN. You can connect Router to your PC directly by crossover
Ethernet cable.
• LAN with Multiple Access Points, Wired Clients, and Wireless Clients: