Manual

26
Other Options
Caller Feed Add PIN - DTMF sequence that will add a caller’s microphone audio to the feed when dialed.
Caller Feed Remove PIN - DTMF sequence that will remove a caller’s microphone audio to the feed when
dialed.
Contact Closures - By default, the contact closure outputs are active when any call is active on a particular feed
(e.g. a call active on Feed #1 triggers Contact Closure #1). The contact closure for each feed can be changed in
the Contact Closure menu.
Test Modes - These options are used for diagnostics or demo purposes only and will interfere with normal
operation when enabled.
Audio Test - These options provide for specific audio paths to be enabled. These are used in unit
production tests and can also be used to troubleshoot general hookup issues. Modes are also
offered that generate a tone from the caller out ports.
Contact Closure Test - Likewise, enabling this option puts the contact closure feature in
“loopback” mode with inputs directly driving outputs (e.g., input 1-> output 1 etc).
SIP Trace - SIP Trace is a diagnostic tool that allows the user to extract packet captures to help with troubleshooting
SIP provider issues.
To perform a SIP Trace, select Trace Target. Select All to capture all traffic to and from the EarShot IFB, or select
one of your SIP Providers from the drop-down menu to perform a packet capture for one specific provider.
Selecting All will provide unfiltered data including broadcast data on your network. There can be a lot of
information in this file that may not be necessary. Selecting the individual providers will give you a more precise
set of information.
Press Save Setting once selected.