Manual

13
Toolbox
The normal mode of changing any settings in EarShot IFB is by clicking the “Web Configuration” tab in the right
pane of Device Manager. This opens the unit’s Toolbox interface. Toolbox is a web-based interface that allows
you to set all relevant parameters of the product. Once you know the unit’s IP address, Toolbox can also be
accessed via a browser by going to http://<ip-address>/cfg.
Toolbox requires that you log on with a username and password. The default user name is “admin” and the
default password is “comrex”. We strongly recommend that users change the default password, especially if
their EarShot IFB is exposed directly to the Internet.
Once you’ve logged in, choose the “Network” option. You should see the following screen:
Select the network you would like to configure (Primary or Secondary) and choose the entry under Network
Mode. The factory default setting for the Primary network is DHCP. As noted on page 10, the Secondary network
is disabled by default and must be enabled in the console interface before it can be configured here. The
Secondary network supports only Static addressing.