Manual

12
Device Manager
Install Device Manager on a computer on the same physical LAN as the EarShot IFB. (This is important, because
Device Manager can generally only access devices that are on the same network it is using.) Once installed and
run, press the “Scan for Devices” button in the upper left corner to scan your network for Comrex products. The
results should look like this:
There are two ways to set/reset the static IP information on the EarShot IFB: using Device Manager or utilizing
Toolbox. (The Toolbox option is described in the following section.)
Device Manager can be used to set static IP settings via the program’s “rescue” mode, which allows you to
change parameters during the first five minutes after a unit has been rebooted, and is initiated by selecting the
“Network Settings” button on the right pane. This option is especially useful if you’ve forgotten the unit login
password.