Manual

Exit the Main Menu and navigate to the System Sengs page. Under CrossLock VPN, locate the entry labeled
“Redundant Transmission” (Figure 70). Change this from the default “O” to “On”, and then click “Apply Changes”.


Finally, set one of the contact closures to sound an alert when the HotSwap funcon is engaged. Sll in the
CrossLock VPN sengs, select “HotSwap CC unit”. Choose whether the contact closure output triggers on the local,
remote, or both codecs (Figure 71). Select “Apply Changes” to save your new sengs.


Next choose “HotSwap CC Indicator” and select which contact closure to trigger (Figure 72). This will override any
previous seng changes made in the main conguraon webpage regarding contact closures.
Choose “Apply Changes” to save changes.
95