Manual
as well as the encoder used to send audio to this ACCESS (remote). The default value of the remote encoder is to
, as described on
transmission disables outgoing audio and disabling the remote encoder transmission disables incoming audio.
local and remote entries and largely deal with the performance
of
. This is actually a very complex decision-making process involving many variables, and
defaults, and Comrex recommends that users take care when changing them.
the decoder on the remote end.
- X
higher than one can reduce network usage, at the expense of delay. This is because packet overhead bits like IP and
.
-
decoder error concealment hides these packet losses. The
- Retransmit Squelch
second.