Manual




Standard RTP,
 and 







To communicate with a



 NX Rack - On the tab, open the Standard RTP RTP
. On the pull-down box, choose .
  - 

mono is returned to the

mode in the

  on the NX Rack and select a
 of Standard RTP






 

 
 In order for an Xstream to decode an NX Rack 
from <Auto> to <AAC> in the codec menu of the Xstream.
To communicate with a

 
 NX Rack - On the tab, open the RTP
. On the pull-down box, select .
  - 


