Manual

29
 - Familiar name to call this entry.
 - The public IP address of the desnaon (phone number for POTS
calls). If using non-default ports, add the port number aer a colon.
 - Select which prole is used to make the connecon. (Proles determine encoders used
and other parameters—see the  secon on .) If no selecon is made
for proles, the call will proceed with the default prole of Opus mono.

Follow the direcons above for Manual Connecons without CrossLock, but in addion, add the Switchboard ID (MAC
Address) of the codec you’ll be connecng to. This is an added security layer to ensure only authorized codecs connect
via CrossLock. This is input when creang or eding a remote into the Switchboard ID eld.
It’s important to note that in order to connect this way, the receiving codec must also have a matching entry including
the Switchboard ID (MAC address) of the calling codec. This must be present as an outgoing entry (even if the entry is
never actually used for outgoing calls). The Switchboard ID (MAC address) of the NX Portable can be located in
. The Node ID is the MAC address and thus the Switchboard ID.
If these condions aren’t met, or if the receiving codec is not CrossLock capable, a legacy BRIC Normal style connecon
will be aempted.

Choose the manual or Switchboard entry desired and press the green “” buon. Call progress and status will
appear on the entry. If a CrossLock connecon is established, the “” icon on the status bar will light green.

No acon is necessary to receive incoming calls on NX. Whether via Switchboard or manually, NX will automacally
connect compable incoming calls and show them in the remote list.