Manual
17
With the device powered on, verify Internet connecvity with the Verizon modem. On the NX display in the boom
status bar, any connected network will be displayed. Click on the 4G device listed, and an IP address will appear if you are
successfully connected to the network.
Let’s assume your codec eet has an account on the Comrex Switchboard server (explained in the
Switchboard secon on ), and both ends of your connecon are properly registered with it in advance. Navigate
to the menu by pressing the home key under the display. This page contains the informaon
needed to connect to a device. Units that are in your Switchboard account on the same contact list will automacally
appear in this list with a gear icon next to it.
Select the remote in the list and select on the right of the screen. Your unit will now connect to the rackmount
at the studio.
Once nished, select on the right of the screen.
Audio level meters for both the local and return (remote) audio are in the boom right of the display. Adjustments can
be made on the audio levels being sent to the studio and on your headphones using the knobs on the corresponding
channel of the NX.