Manual
14
: Make careful note of the direcon you are plugging the power into the connector. The arrow on the
connector should be facing down when connecng to the NX. The same applies to the Serial cable. The Contact Closure
cable will have the at secon facing down.
1 - 3-pin female XLR connectors designed to accept a balanced, microphone or line level
audio feed. This input level is adjustable via the control knob for each channel respecvely.
There are 3 input sengs: and. is for standard dynamic microphones
or headsets should use
2 - This 3-conductor 1/4” connector is designed to deliver audio to stereo
headphones. The output audio can be user-adjusted by the and knobs on the top
of the unit.
3 This 3-conductor 3.5 mm connector delivers unbalanced stereo output audio. The
output is selectable in the soware to be either , , or both.