User's Manual

US Smart Outlet Purchase Spec September 21, 2012
Doc: D10025-002 Tendril Confidential Page 13
7 Agency Requirements
7.1 Electromagnetic Compatibility (EMC)
7.1.1 Background Radiation
The unit is certified as passing EMC requirements covered under the UL 916 spec.
The unit is certified under FCC part 15 Class B. External labeling shall indicate certification.
7.1.2 RF - United States - FCC
The unit meets FCC Part 15 Subpart C for intentional radiators. The radio module FCC ID of QPU3020
extends to device. External labeling shall indicate certification.
7.1.3 RF - Canada - IC
The radio module used internally is IC Certified. The radio module IC: 4523A-SN2030 extends to device.
External labeling shall indicate certification.
7.2 Safety
7.2.1 Safety Standards
The unit displays certification to the following specifications:
• UL 498 and UL 916 (Load Management Equipment) or ETL equivalent
• CAN/CSA 22.2: Canadian UL Listed to Canadian Safety Standards
7.2.2 Required Safety Notifications
Labeling - The label on the units need to be made of a UL or ETL Recognized material by a UL or ETL
Recognized label manufacturer and be suitable for the surface on which it is placed. The label must
contain the following minimal information:
• Manufacturer's name
• Electrical ratings
• Model number
7.2.3 Additional UL Requirements
• All components are UL Certified
• A/C adapters are UL Listed, Class 2, UL flammability rating of the plastics as low as 94 HB
• PCBs are made of a UL Recognized material and manufactured by a UL Recognized supplier
• PCB temperature rating is rated 105 degrees C minimum
7.2.4 Future Agency Certification Plans
As the device is modified to be suitable for international shipment, the following agency certifications will
be required and displayed via labeling:
a) CE (Europe)
b) C-TICK (Australia and New Zealand)