User's Manual

US Smart Outlet Purchase Spec September 21, 2012
Doc: D10025-002 Tendril Confidential Page 7
4.4 Button
A large button on the front of the unit is used to provide manual input to the processor. It provides tactile
feedback upon closing the switch. It activates with < 1lb pressure and is warranted for 5000 presses.
4.5 Device Labeling
Please refer to the Product Labeling Specification D10022-001 for the general device labeling
requirements. This section covers device specific details over and above that specification.
4.5.1 Housing and Agency Label
For this product, the Housing and Agency labels can be split into two labels or applied as one label (on
the back of the unit) as long as clear readability of the contents are maintained. EUI-64, Installation Code,
Agency marks, FCC ID and IC numbers must be clearly visible.
4.5.1.1 Company and Product Name
This product should display manufacturer’s company and model name on the label instead of
“Tendril Networks, Inc.” specified in the Product Labeling Spec.
4.5.1.2 Tendril Logo
Instead of Tendril Logo specified in Product Labeling Spec, the following logo should be placed on
any one of labels.
This logo identifies the product as Tendril Connect certified.
4.5.1.3 Model Number
Tendril model number for this product is defined as TDL6192
4.5.1.4 Label Example
Below is a sample of contents in a single label case. Please refer to the Product Labeling Spec for
two labels.