User's Manual

Fireplace new platform product specification
Copyright © 2014 Computime Limited. All rights reserved. Rev. 1.2
Scope: This document establishes the performance, design, test, and acceptance requirements for the
fireplace new platform controller.
Revision History
Rev. Date
(DD-MM-YYYY)
History / Change Prepared By
0.1 20 February 2014 First draft WY Qu
0.2 09 April 2014 Second draft WY Qu
0.3 15 April 2014 Third draft
- Add more description on Backlight(3.1.16)
- Define model option(3.1.3)
- Clear low battery operation(3.1.11)
- Define Receiver operation (3.2.2)
- Modified pulse define(5.1.4)
- Define software flowchart
KLTsang
1.0 16 April 2014 Official Rev 1.0 release KL Tsang
1.1 20 June 2014 - At ‘Lo’ state, all keys can operate and send command
At ‘HI’ state, OFF key can operate only.(3.1.15)
- Add sensor error operation(3.1.17)
- Remain the status(OFF) from OFF to RS(3.2.2)
- Change Reset to power on(5.1.3)
- Update sensor error operation main loop of transmitter
- Add max temperature checking in flowchart
KLTsang
1.2 - Change Low battery detection operation(3.1.11)
- Resume the previous status from OFF to RS(3.2.2)
KLTsang
-
-