User's Manual

INSTALLATION

1. Plug the power adapter into the adapter socket on the left-hand side of the unit.

2. Pull out the table stand on the back of the unit and place the unit on a firm, flat surface near a power

source.

3. Insert the plug into a 120 or 220 V wall socket.

BACKLIGHT

Press any button to turn on the backlight.

Note: If the backlight has turned off, you need to press any button to turn it on again before you can enter the

menus.

NAVIGATION BUTTONS

The navigation buttons are as follows:

Throughout this manual, the buttons to press in order to access the onscreen commands will be referred to as

(1), (2), (3), (4).